 |
 |
|
We have 371 guests and 0 members online
You are an anonymous user. You can register for free by clicking here
|
|
|
BTT Electric Helicopter CUPID 40 / 72MHz
(368 total words in this text)
(10020 Reads) 
Technical Data:
Main rotor diameter: 530mm
Fuselage length: 500mm
Battery: 7NiMH, 8.4V
R/C Transmitter: 4 Channel FM
Power Input: 220V
Necessary Items Included:
4CH Transmitter, 4CH Micro Receiver, two Micro Servo, Micro Gyro, Mixer.
Batteries and Charger are included
Fully assembled-PLay just after recharge the battery
Transmitter: 8 x 1.5V AA required (NOT Included)
Flying:
Makesure the battery pack is fully recharged and it's usually recharged for 2-3 hours.
Put the throttle stick of the 4CH transmitter to the neutral and turn on the transmitter.
Put the helicopterin the middle of the room and connect the battery, the Gyro and mixer will autocheck the frequency.
When the LED on the PCB stops flashing and remain solid green, the setting is ready to play.
BTT Electric Helicopter CUPID 40 / 72MHz
Electric Helicopter CUPID Mode 2
Technical Data | Frequency | 40 / 72MHz | | Main Rotor Diameter | 530mm | | Fuselage Length | 500mm | | Battery | 7 NiMH 8.4V | | R/C Transmitter | 4 Channel FM | | Power Input | 220V |
Necessary Items Included:
4CH Transmitter, 4CH Micro Receiver, two Micro Servo, Micro Gyro, Mixer.
Batteries and Charger are included
Fully assembled-PLay just after recharge the battery
Transmitter: 8 x 1.5V AA required (batteries NOT included)
Flying:
Make sure the battery pack is fully recharged and it's usually recharged for 2-3 hours.
Put the throttle stick of the 4CH transmitter to the neutral and turn on the transmitter.
Put the helicopterin the middle of the room and connect the battery, the Gyro and mixer will autocheck the frequency.
When the LED on the PCB stops flashing and remain solid green, the setting is ready to play.
All replacement parts are available at rcMart.
|
[ Back to EP Helicopter | Sections index ] |
|
|
| |
.jpg)
.jpg)
